Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 376)

360 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
4
wep128 keys-from-passkey <WORD>
wep128 transmit-key <1-4>
Parameters
wep128 key <1-4> [ascii|hex] [0 <WORD>|2 <WORD>|<WORD>]
wep128 keys-from-passkey <WORD>
wep128 transmit-key <1-4>
Example
rfs7000-37FABE(config-wlan-test)#wep128 keys-from-passkey
motorolasolutions@123
rfs7000-37FABE(config-wlan-test)#show context
wlan test
ssid testWLAN1
vlan-pool-member 1 limit 1
vlan-pool-member 2 limit 1
vlan-pool-member 3 limit 1
vlan-pool-member 4 limit 1
vlan-pool-member 5 limit 1
vlan-pool-member 6 limit 1
vlan-pool-member 7 limit 1
vlan-pool-member 8 limit 1
vlan-pool-member 9 limit 1
vlan-pool-member 10 limit 1
bridging-mode local
encryption-type none
authentication-type none
protected-mgmt-frames mandatory
wep128 key 1 hex 0 25f6e7ed9718918a87a75acc75
wep128 key 2 hex 0 2b3fb36924b22dffe98c86c315
wep128 key 3 hex 0 1ebf3394431700194762ebd5b2
wep128 key 4 hex 0 e3de75be311bd787aeac5e4e8b
radius vlan-assignment
time-based-access days weekdays start 10:00 end 16:30
--More--
wep128 Configures WEP128 parameters. The parameters are: key, key-from-passkey, and transmit-key.
key <1-4>] Configures pre-shared hex keys
•
<1-4> – Configures a maximum of four key indexes. Select the key index from 1 - 4.
ascii
[0 <WORD>|
2 <WORD>|<WORD>] Sets keys as ASCII characters (5 characters for WEP64, 13 for WEP128)
•
0 <WORD> – Configures a clear text key
•
2 <WORD> – Configures an encrypted key
•
<WORD> – Configures keys as 13 ASCII characters converted to hex, or 26 hexadecimal characters
hex
[0 <WORD>|
2 <WORD>|<WORD>] Sets keys as hexadecimal characters (10 characters for WEP64, 26 for WEP128)
•
0 <WORD> – Configures a clear text key
•
2 <WORD> – Configures an encrypted key
•
<WORD> – Configures keys as 13 ASCII characters converted to hex, or 26 hexadecimal characters
keys-from-passkey
<WORD> Specifies a passphrase from which keys are derived
•
<WORD> – Specify a passphrase from 4 - 32 characters.
transmit-key <1-4> Configures the key index used for transmission from an AP to a wireless client or service platform
•
<1-4> – Specify a key index from 1 - 4.