Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 806

Brocade Mobility RFS Controller CLI Reference Guide
793
53-1003098-01
7
use [advanced-wips-policy|auto-provisioning-policy|captive-portal|
client-identity-group|dhcp-server-policy|event-system-policy|firewall-policy|
global-assoc-list|management-policy|profile|radius-server-policy|rf-domain|
role-policy|routing-policy|wips-policy|critical-resource-policy|smart-rf-poli
cy|
trustpoint]
NOTE
The following tables contain the ‘use’ command parameters for the Profile and Device configuration
modes.
ParametersProfiles Mode
use
[advanced-wips-policy|auto-provisioning-policy|captive-portal|client-identity
-group|dhcp-server-policy|event-system-policy|firewall-policy|global-assoc-li
st|
management-policy|radius-server-policy|role-policy|routing-policy|critical-re
source-policy]
use
Associates the specified policies with this profile
The specified policies should be existing and configured.
advanced-wips-policy
<POLICY-NAME>
Associates an advanced WIPS policy
•
<POLICY-NAME> – Specify the WIPS policy name.
auto-provisioning-policy
<POLICY-NAME>
Associates an auto provisioning policy
•
<POLICY-NAME> – Specify the auto provisioning policy name.
captive-portal server
<CAPTIVE-PORTAL>
Configures access to a specified captive portal with this profile
•
<CAPTIVE-PORTAL> – Specify the captive portal name.
client-identity
<CLIENT-IDENTITY-GROUP-N
AME>
Associates an existing client identity group with this profile
•
<CLIENT-IDENTITY-GROUP-NAME> – Specify the client identity group name.
For more information on the ‘client-identity’ and ‘client-identity-group’ commands, see
.
dhcp-server-policy
<DHCP-POLICY>
Associates a DHCP server policy
•
<DHCP-PLOICY> – Specify the DHCP server policy name.
event-system-policy
<EVENT-SYSTEM-POLICY>
Associates an event system policy
•
<EVENT-SYSTEM-POLICY> – Specify the event system policy name.
firewall-policy
<FW-POLICY>
Associates a firewall policy
•
<FW-POLICY> – Specify the firewall policy name.
global-assoc-list server
<GLOBAL-ASSOC-LIST-NAME
>
Associates the specified global association list with the controller profile
•
<GLOBAL-ASSOC-LIST-NAME> – Specify the global association list name.
Once associated, the controller, using this profile, applies this association list to requests received from all
adopted APs. For more information on global association list, see
management-policy
<MNGT-POLICY>
Associates a management policy
•
<MNGT-POLICY> – Specify the management policy name.
radius-server-policy
<RADIUS-POLICY>
Associates a device onboard RADIUS policy
•
<RADIUS-POLICY> – Specify the RADIUS policy name.