Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 483
Brocade Mobility RFS Controller CLI Reference Guide
469
53-1003098-01
6
show interface {<INTERFACE-NAME>|brief|counters|ge <1-4>|me1|on|port-channel
<1-2>|
pppoe1|switchport|vlan <1-4094>|wwan1} {on <DEVICE-NAME>}
Example
Following are the interfaces available on a Brocade Mobility 71XX Access Point
controller:
rfs7000-37FABE(config)#show interface ?
WORD Interface name
brief Brief summary of interface status and configuration
counters Interface tx/rx counters
ge GigabitEthernet interface
me1 FastEthernet interface
on On AP/Controller
port-channel Port-Channel interface
pppoe1 PPP Over Ethernet interface
switchport Status of Layer2 interfaces
vlan Switch VLAN interface
wwan1 Wireless WAN interface
| Output modifiers
> Output redirection
>> Output redirection appending
<cr>
rfs7000-37FABE(config)#
nx4500-5CFA2B(config)#
rfs7000-37FABE(config)#show interface switchport on rfs7000-37FABE
-----------------------------------------------------------------------------
----------
INTERFACE STATUS MODE VLAN(S)
interfaces
Optional. Displays system interface status based on the parameters passed
<INTERFACE-NAME>
Optional. Displays status of the interface specified by the <INTERFACE-NAME> parameter. Specify the
interface name.
brief
Optional. Displays a brief summary of the interface status and configuration
counters
Optional. Displays interface Tx or Rx counters
ge <1-4>
Optional. Displays Gigabit Ethernet interface status and configuration
•
<1-4> – Select the Gigabit Ethernet interface index from 1 - 4.
me1
Optional. Displays Fast Ethernet interface status and configuration
port-channel <1-2>
Optional. Displays port channel interface status and configuration
•
<1-2> – Specify the port channel index from 1 - 2.
pppoe1
Optional. Displays PPP over Ethernet interface status and configuration
switch port
Optional. Displays layer 2 interface status
vlan <1-4094>
Optional. Displays VLAN interface status and configuration
•
<1-4094> – Specify the Switch Virtual Interface (SVI) VLAN ID from 1 - 4094.
wwan1
Optional. Displays Wireless WAN interface status, configuration, and counters
on <DEVICE-NAME>
The following keywords are common to all of the above interfaces:
•
on <DEVICE-NAME> – Optional. Displays interface related information on a specified device
•
<DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.