Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 958)

Brocade Mobility RFS Controller CLI Reference Guide 947
53-1003098-01
13
ddns multiple-user-class
excluded-address range 192.168.13.25 192.168.13.28
domain-name documentation
bootfile test.txt
default-router 192.168.13.8 192.168.13.9
dns-server 192.168.13.19
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#
Related Commands:
netbios-name-server
dhcp-pool-mode commands
Configures the NetBIOS (WINS) name server’s IP address. This server is used to resolve NetBIOS
host names.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
netbios-name-server [<IP>|<HOST-ALIAS-NAME>] {<IP1>|<HOST-ALIAS-NAME1>}
Parameters
netbios-name-server [<IP>|<HOST-ALIAS-NAME>] {<IP1>|<HOST-ALIAS-NAME1>}
Example
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#netbios-name-server
192.168.13.25
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#show context
dhcp-pool testPool
network 192.168.13.0/24
address 192.168.13.4 class dhcpclass1
lease 100 23 59 59
no Resets values or disables the DHCP pool lease settings
[<IP>|<HOST-ALIAS-NAME>] Configures the primary NetBIOS name server, using one of the following options:
•
<IP> – Specifies the primary NetBIOS name server’s IP address
•
<HOST-ALIAS-NAME> – Specifies a host alias, mapped to the primary NetBIOS name server’s IP
address
{<IP1>|<HOST-ALIAS-NAME1>
} Optional. Configures the secondary NetBIOS name server, using one of the following options:
•
<IP1> – Specifies the secondary NetBIOS name server’s IP address
•
<HOST-ALIAS-NAME1> – Specifies a host alias, mapped to the secondary NetBIOS name server’s
IP address. If the primary NetBIOS name server is unavailable, the secondary server is used.
A network host alias maps a name to a single network host. For example, ‘alias host $HOST 1.1.1.100’.
In this example the host alias is ‘$HOST’ and it maps to a single host ‘1.1.1.100’. For more information,
see
alias .