Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 121)

104 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
3
crypto pki generate self-signed <TRUSTPOINT-NAME>
[generate-rsa-key|use-rsa-key]
<RSA-KEYPAIR-NAME> autogen-subject-name {(email <SEND-TO-EMAIL>,fqdn
<FQDN>,ip-address <IP>,on <DEVICE-NAME>)}
crypto pki generate self-signed <TRUSTPOINT-NAME>
[generate-rsa-key|use-rsa-key]
<RSA-KEYPAIR-NAME> subject-name <COMMON-NAME> <COUNTRY> <STATE> <CITY>
<ORGANIZATION> <ORGANIZATION-UNIT> {(email <SEND-TO-EMAIL>,fqdn
<FQDN>,ip-address <IP>,on <DEVICE-NAME>)}
pki Enables PKI management. Use this command to authenticate, export, generate, or delete a trustpoint and
its associated CA certificates.
generate Generates a CA certificate and a trustpoint
self-signed
<TRUSTPOINT-NAME> Generates a self-signed CA certificate and a trustpoint
•
<TRUSTPOINT-NAME> – Specify a name for the certificate and its trustpoint.
[generate-rsa-key|
use-rsa-key]
<RSA-KEYPAIR-NAME> Generates a new RSA Keypair, or uses an existing RSA Keypair
•
generate-rsa-key – Generates a new RSA Keypair for digital authentication
•
use-rsa-key – Uses an existing RSA Keypair for digital authentication
•
<RSA-KEYPAIR-NAME> – If generating a new RSA Keypair, specify a name for it. If using an existing
RSA Keypair, specify its name.
autogen-subject-name Auto generates the subject name from the configuration parameters. The subject name helps to identify
the certificate
email
<SEND-TO-EMAIL> Optional. Exports CSR to a specified e-mail address
•
<SEND-TO-EMAIL> – Specify the CA’s e-mail address.
fqdn <FQDN> Optional. Exports CSR to a specified FQDN
•
<FQDN> – Specify the CA’s FQDN.
ip-address <IP> Optional. Exports CSR to a specified device or system
•
<IP> – Specify the CA’s IP address.
on <DEVICE-NAME> Optional. Exports the CSR on a specified device
•
<DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.
pki Enables PKI management. Use this command to authenticate, export, generate, or delete a trustpoint and
its associated CA certificates.
generate self-signed
<TRUSTPOINT-NAME> Generates a self-signed CA certificate and a trustpoint
•
<TRUSTPOINT-NAME> – Specify a name for the certificate and its trustpoint.
[generate-rsa-key|
use-rsa-key]
<RSA-KEYPAIR-NAME> Generates a new RSA Keypair, or uses an existing RSA Keypair
•
generate-rsa-key – Generates a new RSA Keypair for digital authentication
•
use-rsa-key – Uses an existing RSA Keypair for digital authentication
•
<RSA-KEYPAIR-NAME> – If generating a new RSA Keypair, specify a name for it. If using an existing
RSA Keypair, specify its name.
subject-name
<COMMON-NAME> Specify a subject name to identify the certificate.
•
<COMMON-NAME> – Specify the common name used with the CA certificate. The name should
enable you to identify the certificate easily.
<COUNTRY> Sets the deployment country code (2 character ISO code)
<STATE> Sets the state name (2 to 64 characters in length)
<CITY> Sets the city name (2 to 64 characters in length)
<ORGANIZATION> Sets the organization name (2 to 64 characters in length)
<ORGANIZATION-UNIT> Sets the organization unit (2 to 64 characters in length)