Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 843)

830 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
7
trustpoint [https|radius-ca|radius-server] <TRUSTPOINT>
Example
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#trustpoint radius-ca trust2
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#show context
br71xx 00-04-96-4A-A7-08
use profile default-br71xx
use rf-domain default
hostname TechPubAP7131
floor 5thfloor
layout-coordinates 1.0 2.0
license AP aplicenseley@1234 aplicensekey@123
trustpoint radius-ca trust2
rsa-key ssh rsa-key1
location Block3B
no contact
timezone Etc/UTC
stats open-window 2 sample-interval 77 size 10
country-code us
sensor-server 1 ip 172.16.10.7
channel-list 2.4GHz 1,2
override-wlan test vlan-pool 8
mac-name 00-04-96-4A-A7-08 5.4TestAP
neighbor-info-interval 50
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#
Related Commands:
https <TRUSTPOINT> Assigns a specified trustpoint to HTTPS
•
<TRUSTPOINT> – Specify the trustpoint name.
radius-ca <TRUSTPOINT> Assigns a trustpoint as a certificate authority for validating client certificates in EAP
•
<TRUSTPOINT> – Specify the trustpoint name.
radius-server
<TRUSTPOINT> Specifies the name of the trustpoint. Install the trustpoint using PKI commands in the enable mode.
•
<TRUSTPOINT> – Specify the trustpoint name.
no Removes configured trustpoint from service