Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 326)

310 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
4
Syntax:
rfs6000 <DEVICE-Brocade Mobility RFS6000-MAC>
Parameters
rfs6000 <DEVICE-Brocade Mobility RFS6000-MAC>
Example
rfs7000-37FABE(config)#rfs6000 11-20-30-40-50-61
rfs7000-37FABE(config-device-11-20-30-40-50-61)#
Related Commands:
rfs7000
Global Configuration Commands
Adds a Brocade Mobility RFS7000 wireless controller to the network
Supported in the following platforms:
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
rfs7000 <DEVICE-Brocade Mobility RFS7000-MAC>
Parameters
rfs7000 <DEVICE-Brocade Mobility RFS7000-MAC>
Example
rfs7000-37FABE(config)#rfs7000 12-20-30-40-50-62
rfs7000-37FABE(config-device-12-20-30-40-50-62)#
Related Commands:
role-policy
Global Configuration Commands
Configures a role-based firewall policy
Supported in the following platforms:
<DEVICE-Brocade
Mobility RFS6000-MAC> Specify the Brocade Mobility RFS6000’s MAC address.
no Removes a Brocade Mobility RFS6000 model controller from the network
<DEVICE-Brocade
Mobility RFS7000-MAC> Specify the Brocade Mobility RFS7000’s MAC address.
no Removes a Brocade Mobility RFS7000 model controller from the network