Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 691)

678 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
7
dhcp-relay-incoming
interface-config-vlan-instance
Allows an onboard DHCP server to respond to relayed DHCP packets
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
dhcp-relay-incoming
Parameters
None
Example
rfs7000-37FABE(config-profile-default-rfs7000-if-vlan8)#dhcp-relay-incoming
rfs7000-37FABE(config-profile-default-rfs7000-if-vlan8)#show context
interface vlan8
description This\ VLAN\ interface\ is\ configured\ for\ the\ Sales\ Team
crypto map map1
dhcp-relay-incoming
rfs7000-37FABE(config-profile-default-rfs7000-if-vlan8)#
Related Commands:
ip
interface-config-vlan-instance
Configures the VLAN interface’s IP settings
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
ip [address|dhcp|helper-address|nat|ospf]
ip helper-address <IP>
no Disables or reverts interface VLAN settings to their default