Contact – Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 309
Brocade Mobility RFS Controller CLI Reference Guide
293
53-1003098-01
4
•
Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
•
Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
•
Service Platforms — Brocade Mobility RFS9510
Syntax:
channel-list [2.4GHz|5GHz|dynamic]
channel-list dynamic
channel-list [2.4GHz|5GHz] <CHANNEL-LIST>
Parameters
channel-list dynamic
channel-list [2.4GHz|5GHz] <CHANNEL-LIST>
Example
rfs7000-37FABE(config-rf-domain-default)#channel-list 2.4GHz 1-10
rfs7000-37FABE(config-rf-domain-default)#show context
rf-domain default
no country-code
channel-list 2.4GHz 1,2,3,4,5,6,7,8,9,10
rfs7000-37FABE(config-rf-domain-default)#
Related Commands:
contact
Configures the network administrator’s contact details. The network administrator is responsible
for addressing problems impacting the network.
Supported in the following platforms:
•
Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
•
Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
dynamic
Enables a dynamic update of a channel list
2.4GHz <CHANNEL-LIST>
Configures the channel list advertised by radios operating in the 2.4 GHz mode
•
<CHANNLE-LIST> – Specify the list of channels separated by commas or hyphens.
5GHz <CHANNEL-LIST>
Configures the channel list advertised by radios operating in the 5.0 GHz mode
•
<CHANNLE-LIST> – Specify the list of channels separated by commas or hyphens.
Removes the list of channels configured on the selected RF Domain for 2.4 GHz and 5.0 GHz bands. Also
disables dynamic update of a channel list.