Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 720)

Brocade Mobility RFS Controller CLI Reference Guide 707
53-1003098-01
7
beacon dtim-period bss 11 5
beacon dtim-period bss 12 5
beacon dtim-period bss 13 5
beacon dtim-period bss 14 5
beacon dtim-period bss 15 5
beacon dtim-period bss 16 5
antenna-gain 12.0
guard-interval long
aggregation ampdu tx-only
aeroscout forward
ekahau forward ip 172.16.10.1 port 3
antenna-mode 2x2
antenna-diversity
airtime-fairness prefer-ht weight 6
lock-rf-mode
extended-range 15
--More--
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#
Related Commands:
max-clients
interface-config-radio-instance
Configures the maximum number of wireless clients allowed to associate with this radio
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
Syntax:
max-clients <0-256>
Parameters
max-clients <0-256>
Example
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#max-clients 100
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#show context
interface radio1
description Primary\ radio\ to\ use
channel 1
data-rates b-only
beacon period 50
beacon dtim-period bss 1 5
beacon dtim-period bss 2 2
..............................................
beacon dtim-period bss 12 5
beacon dtim-period bss 13 5
no Allows Smart RF to change a radio’s RF mode settings
<0-256> Configures the maximum number of clients allowed to associate with a radio. Specify a value from 0 -
256. The default is 256.