Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 891)

Brocade Mobility RFS Controller CLI Reference Guide 879
53-1003098-01
10
event dos-cts-flood trigger-against [neighboring|sanctioned|unsanctioned]
{(neighboring|sanctioned|unsanctioned)}
event dos-eapol-logoff-storm threshold [eapol-start-frames-br <0-65535>|
eapol-start-frames-mu <0-65535>]
event dos-eapol-logoff-storm trigger-against
[neighboring|sanctioned|unsanctioned] {(neighboring|sanctioned|unsanctioned)}
event probe-response-flood threshold probe-rsp-frames-count <0-65535>
event probe-response-flood trigger-against
[neighboring|sanctioned|unsanctioned] {(neighboring|sanctioned|unsanctioned)}
event rogue-br-detection mitigation-enable
dos-cts-flood This event occurs when a large number of CTS frames are detected in the network
trigger-against (neighboring,
sanctioned, unsanctioned) Sets the event trigger condition
•
sanctioned – An event is triggered only against sanctioned devices
•
unsanctioned – An event is triggered only against unsanctioned devices
•
neighboring – An event is triggered only against neighboring devices
dos-eapol-logoff-storm This event occurs when a large number of EAPOL logoff frames are detected in the network
threshold
[eapol-start-frames-br
<0-65535>|
eapol-start-frames-mu
<0-65535>] Sets the EAPOL logoff frames flood threshold
•
eapol-start-frames-br – Sets the EAPOL start frames transmitted by an AP to trigger this event
•
<0-65535> – Specify a value from 0 - 65535.
•
eapol-start-frames-mu – Sets the EAPOL start frames transmitted by a client to trigger this event
•
<0-65535> – Specify a value from 0 - 65535.
dos-eapol-logoff-storm This event occurs when a large number of EAPOL logoff frames are detected in the network
trigger-against (neighboring,
sanctioned, unsanctioned) Sets the event trigger condition
•
sanctioned – An event is triggered only against sanctioned devices
•
unsanctioned – An event is triggered only against unsanctioned devices
•
neighboring – An event is triggered only against neighboring devices
probe-response-flood This event occurs when a large number of probe response frames are detected in the network
threshold
probe-rsp-frames-count
<0-65535> Sets the probe response frames flood threshold
•
probe-rsp-frames-count – Sets the threshold from the number of probe response frames received
•
<0-65535> – Specify the value from 0 - 65535.
probe-response-flood This event occurs when a large number of probe response frames are detected in the network
trigger-against (neighboring,
sanctioned, unsanctioned) Sets the event trigger condition
•
sanctioned – An event is triggered only against sanctioned devices
•
unsanctioned – An event is triggered only against unsanctioned devices
•
neighboring – An event is triggered only against neighboring devices
rogue-br-detection This event occurs when rogue APs are detected in the network
mitigation-enable Enables default mitigation for the rogue-br-detection event