Client-identity-group- mode commands, Client-identity-group-mode commands – Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual

Page 227

Advertising
background image

Brocade Mobility RFS Controller CLI Reference Guide

211

53-1003098-01

4

rfs4000-229D58(config-client-identity-group-test)#

client-identity-group-mode commands

client-identity-group

The following table summarizes a new client identity group configuration mode commands.

client-identity

client-identity-group-mode commands

Associates an existing and configured client identity (device fingerprinting) with this client identity
group

Supported in the following platforms:

Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point

Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000

Service Platforms — Brocade Mobility RFS9510

Syntax:

client-identity <CLIENT-IDENTITY-NAME> precedence <1-10000>

Parameters

client-identity <CLIENT-IDENTITY-NAME> precedence <1-10000>

Example

The following example shows two client identities created and configured:

rfs4000-229D58(config)#show context

!

! Configuration of Brocade Mobility RFS4000 version 5.5.0.0-018D

!

!

version 2.1

!

!

Command

Description

Reference

client-identity

Associates an existing and configured client identity (device fingerprinting) with this client
identity group

page 211

no

Removes the client identity associated with this client identity group

page 208

client-identity
<CLIENT-IDENTITY-NAME>

Associates a client identity with this group

<CLIENT-IDENTITY-NAME> – Specify a client identity name (should be existing and configured)

precedence <1-10000>

Determines the order in which client identity is used.
<1-10000> – Specify this client identity precedence from <1-10000>.
The client identity rule is applied based on its precedence value. Lower the value, higher is the precedence.
Therefore, a client identity with precedence 5 will get precedence over a client identity having precedence
20.

Advertising