Range – Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual

Page 1236

Advertising
background image

1228

Brocade Mobility RFS Controller CLI Reference Guide

53-1003098-01

24

Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point

Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000

Syntax:

authentication [message-digest|simple-password]

Parameters

authentication [message-digest|simple-password]

Usage Guidelines:

OSPF packet authentication enables routers to use predefined passwords and participate within a
routing domain. The two authentication modes are:

MD-5 – MD-5 authentication is a cryptographic authentication mode, where every router has a
key (password) and key-id configured on it. This key and key-id together form the message
digest that is appended to the OSPF packet.

Simple Password – Simple password authentication allows a password (key) to be configured
per area. Routers in the same area and participating in the routing domain have to be
configured with the same key.

Example

rfs7000-37FABE(config-profile

default-rfs7000-router-ospf-area-0.0.0.1)#authentication simple-password

rfs7000-37FABE(config-profile default-rfs7000-router-ospf-area-0.0.0.1)#show

con

text

area 0.0.0.1

authentication simple-password

area-type stub default-cost 1

rfs7000-37FABE(config-profile default-rfs7000-router-ospf-area-0.0.0.1)#

Related Commands:

range

OSPF-area-mode

Specifies a range of addresses for routes matching address/mask for OSPF summarization

Supported in the following platforms:

Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point

message-digest

Configures the message-digest (MD-5) authentication scheme

simple-password

Configures the simple password authentication scheme

no

Removes the authentication scheme

Advertising