Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual

Page 278

Advertising
background image

262

Brocade Mobility RFS Controller CLI Reference Guide

53-1003098-01

4

exclude 00-04-96-B0-BA-2A 00-04-96-B0-BA-2A precedence 1

include 00-15-70-38-06-49 00-15-70-38-06-49 precedence 2

rfs7000-37FABE(config-nac-list-test)#

no

nac-list-mode commands

Cancels an exclude or include NAC list rule

Supported in the following platforms:

Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point

Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000

Service Platforms — Brocade Mobility RFS9510

Syntax:

no [exclude|include]

no [exclude|include] <START-MAC> [<END-MAC> precedence <1-1000>|precedence

<1-1000>]

Parameters

no [exclude|include] <START-MAC> [<END-MAC> precedence <1-1000>|precedence

<1-1000>]

Example

The following example shows the NAC list ‘test’ settings before the ‘no’

command is executed:

rfs7000-37FABE(config-nac-list-test)#show context

nac-list test

exclude 00-04-96-B0-BA-2A 00-04-96-B0-BA-2A precedence 1

include 00-15-70-38-06-49 00-15-70-38-06-49 precedence 2

rfs7000-37FABE(config-nac-list-test)#

rfs7000-37FABE(config-nac-list-test)#no exclude 00-40-96-B0-BA-2A precedence 1

The following example shows the NAC list ‘test’ settings after the ‘no’

command is executed:

rfs7000-37FABE(config-nac-list-test)#show context

no exclude

Removes an exclude rule

no include

Removes an include rule

<START-MAC>

Specifies a range of MACs included in/removed from the NAC enforcement list
Specify the first MAC address in the range.
NOTE: Use this parameter to specify a single MAC address.

<END-MAC>

Specify the last MAC address in the range (optional if a single MAC is added to the list).

precedence <1-1000>

Sets the rule precedence for this rule. Exclude entries are checked in the order of their rule precedence.

<1-1000> – Specify a value from 1 - 1000.

Advertising