Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 124)

Brocade Mobility RFS Controller CLI Reference Guide 107
53-1003098-01
3
Related Commands:
delete
Privileged Exec Mode Commands
Deletes a specified file from the device’s file system
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
delete [/force <FILE>|/recursive <FILE>|<FILE>]
Parameters
delete [/force <FILE>|/recursive <FILE>|<FILE>]
Example
rfs7000-37FABE#delete flash:/out.tar flash:/out.tar.gz
Delete flash:/out.tar [y/n]? y
Delete flash:/out.tar.gz [y/n]? y
rfs7000-37FABE#delete /force flash:/tmp.txt
rfs7000-37FABE#
rfs7000-37FABE#delete /recursive flash:/backup/
Delete flash:/backup//fileMgmt_350_180B.core
[y/n]? y
Delete
flash:/backup//fileMgmt_350_18212X.core_bk
[y/n]? n
Delete flash:/backup//imish_1087_18381X.core.gz
[y/n]? n
rfs7000-37FABE#
no Removes server certificates, trustpoints and their associated certificates
/force <FILE> Forces deletion without a prompt
/recursive <FILE> Performs a recursive delete
<FILE> Specifies the file name
•
Deletes the file specified by the <FILE> parameter