Rockwell Automation 900-TC32 Digital Temperature Controllers, Series B - Manual (Page 195)

Publication 900-UM007D-EN-E - January 2011
Parameter Adjustments & Application Considerations 4-59
10. Press the U or D key to set the manual MV. (In this example, the MV
is configured to 500%.) Note: The manual MV setting must be fixed,
but values changed with key operations are reflected in the control
output immediately.
Figure 4.121
11. Press the O key for at least 1 second to move from the Manual
Control function group to the Operation function group.
Figure 4.122
EXAMPLE
Auto/Manual Example Operating Procedure
In this example, A-M is configured for the PF Setting parameter (900-TC8
only).
1. Press the O Key for at least three seconds to move from the Operation
to the Initial Setting function group.
Figure 4.123 — Operation function group
Figure 4.124 — Initial Setting function group
2. Select the Move to Advanced Setting parameter by pressing the M Key.
Figure 4.125
C 25
50.0
C 25
100
PV/SP
C 25
100
alm
in-t
5
Input Type
cntl
pid