Rockwell Automation 900-TC32 Digital Temperature Controllers, Series B - Manual (Page 70)

Publication 900-UM007D-EN-E - January 2011
2-32 Preparations
Driver Installation
When the cable is connected with the personal computer, the personal
computer’s operating system detects the product as a new device. At this time,
install the driver using the installation wizard. For details on installation
methods, refer to the user’s manual for the 900-CPOEM1-Serial Conversion
Cable.
When setting 900 BuilderLite for direct communication the port parameters of
the direct communication port are fixed as shown in Table 2.L. Set the
Bulletin 900 BuilderLite communication parameters to match those in
Table 2.L
Table 2.L — Fixed Port Parameters
Parameter Value
Communication Unit # 01
Communication Baud Rate 38.4 (Kbps)
Communication Data Length 7 (bits)
Communication Stop Bits 2 (bits)
Communication Parity Even