Rockwell Automation 900-TC32 Digital Temperature Controllers, Series B - Manual (Page 332)

Publication 900-UM007D-EN-E - January 2011
5-104 Parameter Functions & Definitions
Function: This parameter allows you to select the MV display for PV/SP/MV
during heating and cooling control. Either heating MV or cooling MV can be
selected.
PV Decimal Point Display
Conditions of Use: The input type must be set to temperature input.
Function: The display below the decimal point in the PV can be hidden for
temperature inputs. The PV decimals below the decimal point can be hidden
by setting the PV Decimal Point Display parameter to OFF. When this
parameter is set to ON, the display below the decimal point will appear
according to the input type setting.
Related Parameter
• Input Type (Initial Setting function group, page 5-50)
Table 5.EA
Selections Default
o: MV (heating)
c-o: MV (cooling)
o
Table 5.EB
Selections Default
on:ON, off: OFF
ON
pvdp