Rockwell Automation 900-TC32 Digital Temperature Controllers, Series B - Manual (Page 369)

Publication 900-UM007D-EN-E - January 2011
B-9
Monitor Setting Item Function Group
The contents displayed vary depending on the Monitor/Setting Value 1 to 5
(Advanced Setting function group).
Table B.F — Advanced Setting Function Group
Parameters Characters Setting (Monitor) Value Display Default Unit Set Value
Parameter Initialization
init
OFF, FACT
off
fact
OFF None
Multi-SP Use mspu OFF, ON off on OFF None
SP Ramp Time Unit
spru
S: EU/second
M: EU/minute
s m
M None
Standby Sequence
Reset rest Condition A, condition B a b Condition A None
HB ON/OFF hbu OFF, ON off on ON None
Auxiliary Output 1
Open in Alarm
al1n
N-O: Open in alarm
N-C: Close in alarm
n-o
n-c
N-O None
Auxiliary Output 2
Open in Alarm al2n N-O: Open in alarm
N-C: Close in alarm
n-o
n-c
N-O None
Auxiliary Output 3
Open in Alarm
al3n
N-O: Open in alarm
N-C: Close in alarm
n-o
n-c
N-O None
Heater Burnout Latch hbl OFF, ON off on OFF None
Heater Burnout
Hysteresis hbh 0.1…50.0 0.1 A
ST Stable Range
st-b
0.1…999.9 15.0
°C or °F
α alfa 0.00…1.00 0.65 None
AT Calculated Gain
at-g
0.1...10.0 0.8 None
AT Hysteresis at-h Universal input: 0.1...999.9 0.8 °C or °F ➊
Analog input: 0.01...999.9 0.20 %FS
Limit Cycle MV
Amplitude lcma 5.0...50.0 20.0 %
Input Digital Filter inf 0.0…999.9 0.0 Second
Additional PV Display
pvad
OFF, ON
off on
OFF None
MV Display o-dp OFF, ON off on OFF None
Automatic Display
Return Time
ret
OFF or 1…99
off
1 to 99
OFF Second
Alarm 1 Latch a1lt OFF, ON off on OFF None
Alarm 2 Latch
a2lt
OFF, ON
off on
OFF None
Alarm 3 Latch a3lt OFF, ON off on OFF None
Move to Protect
function group Time
prlt
1…30 3 Second
Input Error Output sero OFF, ON off on OFF None