Pfpt pmsk, Prlp, Pf key protect – Rockwell Automation 900-TC32 Digital Temperature Controllers, Series B User Manual
Page 233: Parameter mask enable, Password to move to protect function group
Publication 900-UM007D-EN-E - January 2011
Parameter Functions & Definitions
5-5
PF Key Protect
Conditions of Use:
The Controller must have a PF Key (900-TC8)
Function:
The PF Key Protect parameter enables and disables PF Key
operation from the controller keypad (900-TC8).
Parameter Mask Enable
Conditions of Use:
This parameter is displayed only when a parameter mask
has been configured from the Software Setup Tool.
Function:
This parameter turns the parameter mask function ON and OFF.
Note:
A parameter mask can be used to hide the display of parameters at the
controller that are not needed. The parameter mask function is
provided by the Software Setup Tool.
Password to Move to Protect Function Group
Function:
This parameter is used to configure the Password to Move to the
Protect function group.
To prevent setting the password incorrectly, the
U
and
O
keys or
D
and
O
keys must be pressed simultaneously to configure the password.
Table 5.E PF Key Protect
Configured Value Description
OFF
PF Key enabled from keypad
ON
PF Key disabled from keypad (Operation as a function key is
prohibited.)
The shaded cell indicates the default.
Table 5.F
Configurable Range
Default
on: Enabled, off: Disabled on
pfpt
pmsk
prlp