Rockwell Automation 900-TC32 Digital Temperature Controllers, Series B - Manual (Page 51)

Publication 900-UM007D-EN-E - January 2011
Preparations 2-13
Panel Mounting — 900-TC32
Mounting to the Panel
Figure 2.13
Note: For waterproof mounting, waterproof packing must be installed on the
controller. Waterproofing is not possible when group mounting several
controllers. Waterproof packing is not necessary when there is no need
for the waterproofing function.
1. For waterproof mounting: Install waterproof packing on the
controller.
2. Insert the 900-TC32 into the mounting hole in the panel.
3. Push the adapter from the terminals up to the panel, and temporarily
fasten the 900-TC32
4. Tighten the two fastening screws on the adapter. Alternately tighten the
two screws little by little to maintain a balance. Tighten the screws to a
torque of 0.29 to 0.39 N·m.