Rockwell Automation 900-TC32 Digital Temperature Controllers, Series B - Manual (Page 209)

Publication 900-UM007D-EN-E - January 2011
Parameter Adjustments & Application Considerations 4-73
EXAMPLE
Using a Simple Program
The program will be started by changing the configuration of the Program
Start parameter. The following shows an example using a simple program with
the program pattern configured to STOP.
Figure 4.163
STRT STRT
STRT
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
RSET RSET
RUN RUN
STOP
PV
Set point
Wait band
Soak time Soak time Soak time
END display
END output
RUN/STOP
status
Program
start