Control output 2 – Rockwell Automation 900-TC32 Digital Temperature Controllers, Series B User Manual
Page 61

Publication 900-UM007D-EN-E - January 2011
Preparations
2-23
(LBA) and Heater Short Alarm (HSA) that are provided for the Bulletin
900 Controller.)
Figure 2.20
Select a surge absorber that satisfies the following conditions.
Control Output 2
• For 900-TC8 & 900-TC16: Output 2 is applied from terminals 11 and
12 or 14 and 15 with the 900-TC16, and from pins 14 and 15 with the
900-TC8. The following diagrams show the available outputs and their
equal internal circuits.
Figure 2.21
➊ Option Unit: 900-TC16P1V2
➋ Option Unit: 900-TC16NCOMV2
The following table shows the specifications for each output type.
Table 2.G
Voltage Used
Varistor Voltage
Surge Resistance
100…120V AC
240…270V
1,000 A min.
200…240V AC
440…470V
Table 2.H — 900-TC8
Output Type
Output 2 Specifications
Triac (AC) relay
250V AC, 3 A (resistive load), electrical durability: 1,000,000
operations
Voltage (PNP)
PNP type, 12V DC +15%/
−20%, 21 mA (with short-circuit
protection)
1
2
Triac (AC)
relay output
Varistor
Varistor
Inductive
load
+
v
L
+
v
L
+
v
L
900-TC8 Control Output 2
Relay
Voltage
GND
Voltage
Voltage
900-TC16 Control Output 2
or
GND
GND
➊
➋