Rockwell Automation 900-TC32 Digital Temperature Controllers, Series B - Manual (Page 274)

Publication 900-UM007D-EN-E - January 2011
5-46 Parameter Functions & Definitions
Related Parameters
Refer to the Advanced Setting function group:
• PF setting (page 5-101)
• Monitor/setting items 1 to 5 (page 5-102)
Manual Control Function Group
When using the PID control mode, the MV Manipulated Variable (output) can
be controlled by you from the controller keypad in manual mode if the
PV/MV parameter is displayed.
Manual/Automatic mode changes will result in bumpless control of the MV
(output). In automatic mode, the final MV will be used as the initial manual
MV when moving from automatic mode to manual mode. In manual mode,
the change value will be fixed immediately and reflected in the actual MV.
10 Alarm value 2 Can be set.
al-2
11 Alarm value upper limit 2 Can be set. al2h
12 Alarm value lower limit 2 Can be set.
al2l
13 Alarm value 3 Can be set. al-3
14 Alarm value upper limit 3 Can be set.
al3h
15 Alarm value lower limit 3 Can be set. al3l
Table 5.BA
Set
Value
Setting
Remarks
Monitor/Setting Symbol