Rockwell Automation 900-TC32 Digital Temperature Controllers, Series B - Manual (Page 243)

Publication 900-UM007D-EN-E - January 2011
Parameter Functions & Definitions 5-15
Related Parameters
Refer to the Advanced Setting function group:
• HS Alarm 1, HS Alarm 2 (page 5-31)
• HS Alarm Use (page 5-88)
• Error Displays
lcr2 (Chpater 6, page 6-5)
Program Start
Conditions of Use: The Program Pattern parameter must NOT be set to
OFF.
Function: This parameter starts and stops the simple program function.
Table 5.Q
• The RUN/STOP status LED will automatically switch to RUN when
this parameter is set to STRT.
• The simple program will stop when this parameter is set to RSET.
• This parameter will function as a monitor display for the start/stop
status of the simple program if an event input is selected to start the
simple program.
Related Parameters
• Soak Time Remain, RUN/STOP (Operation function group, page 5-16)
• Soak Time, Wait Band (Adjustment function group, page 5-39)
• Program Pattern (Initial Setting function group, page 5-57)
• Soak Time Unit (Advanced Setting function group, page 5-96)
Soak Time Remain
Conditions of Use: The Program Pattern parameter must NOT be
configured to OFF.
Parameter Function Default
rset Stops the simple program.(RSET) rset
strt Starts the simple program. (STRT)
prst
sktr