Rockwell Automation 900-TC32 Digital Temperature Controllers, Series B - Manual (Page 228)

Publication 900-UM007D-EN-E - January 2011
4-92 Parameter Adjustments & Application Considerations
2. Select the Move to Advanced Setting function group parameter by
pressing the
M Key
Figure 4.209
3. Use the D Key to enter the password (-169). It is possible to move to
the Advanced Setting function group by either pressing the
M Key or
waiting two seconds without pressing any key.
Figure 4.210
4. Press the M Key to select the PV Status Display Function parameter.
Figure 4.211
5. Press the U Key to select ALM1.
Figure 4.212
6. Press the O Key for at least one second to move to the Initial Setting
Figure 4.213 Initial Setting function group
7. Press the O Key for at least one second to move to the Operation
function group. If the Alarm 1 status is ON, PV and ALM1 will be
alternately displayed.
amov
-169
Move to Advanced
Setting Function Group
init
off
Parameter
Initialization
pvst
off
PV Status
Display
Function
pvst
alm1
PV Status
Display
Function
in-t
5
Input Type