Rockwell Automation 900-TC32 Digital Temperature Controllers, Series B - Manual (Page 34)

Publication 900-UM007D-EN-E - January 2011
1-10 Bulletin 900 Input & Output Overview
Table 1.E — Controller Option Units
900-TC32
Table 1.F — Controller Versions
Heater
Burnout
Event Out Comms
Voltage (SSR)
Control Output 2 Cat. No. for Enhanced
Option Units
Series
1-Phase HB — RS485 — 900-TC16NCOM B
— — RS485 — 900-TC16NACCOM
1-Phase HB Yes — — 900-TC16NEIM
— Yes — — 900-TC16NACEIM
3-Phase HB — RS485 — 900-TC16NCOMP3
— — RS485 Yes 900-TC16NCOMV2
1-Phase HB — — Yes 900-TC16P1V2
➊
Series B option units must be used with Series B controllers. DO NOT use series B option units
with Series A controllers.
DIN Size
(in mm) Number of
Alarms Sensor Input
Type Power Supply
Voltage Control Output
Type Comm Function
(RS-445) Cat. No for Enhanced
900-TC32 Line
1/16th DIN
1
Thermocouple
or RTD
100…240V AC Relay On/Off Yes 900-TC32CRGTZ25
Volts On/Off (SSR) Yes 900-TC32CVGTZ25
Relay On/Off No 900-TC32RGTZ25
Volts On/Off (SSR) No 900-TC32CVGTZ25
24V AC/DC Relay On/Off Yes 900-TC32CRGTZ25
Volts On/Off (SSR) Yes 900-TC32CVGTZ25
Relay On/Off No 900-TC32RGTZ25
Volts On/Off (SSR) No 900-TC32CVGTZ25