Rockwell Automation 900-TC32 Digital Temperature Controllers, Series B - Manual (Page 215)

Publication 900-UM007D-EN-E - January 2011
Parameter Adjustments & Application Considerations 4-79
4. Press the
O Key for at least one second to move from the Initial Setting to
the Operation function group.
Figure 4.174
5. Press the
O Key to move from the Operation function group to the
Adjustment function group.
Figure 4.175
6. Select the Extraction of Square Root Low-cut Point parameter by pressing
the
M Key Operating Procedure
Figure 4.176
7.Use the
U Key to set the parameter to -10.0.
Figure 4.177
8. Press the
O Key to return to the Operation function group.
Figure 4.178
C
25
100
PV/SP
l.adj
sqrp
0.0
Extraction of
Square Root
Low-cut Point
sqrp
10.0
Extraction of
Square Root
Low-cut Point
C 25
100
PV/SP