Rockwell Automation 900-TC32 Digital Temperature Controllers, Series B - Manual (Page 45)

Publication 900-UM007D-EN-E - January 2011
Preparations 2-7
Panel Mounting — 900-TC8
How to Attach the Bulletin 900-TC8 on the Panel
Figure 2.7 — 900-TC8
1. If water-proofing is required, ensure the gasket material is inserted
between the front of the controller’s case and the control panel.
2. Insert the Bulletin 900-TC8 into the mounting hole in the panel
(1…8 mm panel thickness).
3. Pull the upper and lower panel mounting adapters along the
Bulletin 900-TC8 body from the rear of the case up to the panel, and
fasten temporarily.
ATTENTION
!
• Store within the following temperature and humidity
ranges:
Temperature: –25…+65
°C
Humidity: 25…85% (with no icing or condensation)
• Avoid using the Bulletin 900 Controller in places near a
radio, television configured, or wireless installation.
These devices can cause radio disturbances which may
adversely affect the performance of the Bulletin 900
Controller.
Upper Panel
Mounting
Adaptor
Gasket material for
NEMA 4X (waterproof)
material
Lower Panel
Mounting
Adaptor
Control
Panel