Rockwell Automation 900-TC32 Digital Temperature Controllers, Series B - Manual (Page 333)

Publication 900-UM007D-EN-E - January 2011
Parameter Functions & Definitions 5-105
PV Status Display Function
Function: The PV in the No. 1 display for the PV/SP, PV, or PV/Manual MV
Screen is alternately displayed in 0.5-second cycles with the control and alarm
status specified for the PV status display function.
Related Parameter
• Process value/set point, PV (Operation function group, page 5-8)
• PV/MV (manual MV) (Manual Control function group, page 5-47)
Table 5.EC
Selections Default
off: No PV status display
off
manu: MANU is alternately displayed during manual control.
stop: STOP is alternately displayed while operation is stopped.
alm1: ALM1 is alternately displayed during Alarm 1 status.
alm2: ALM2 is alternately displayed during Alarm 2 status.
alm3: ALM3 is alternately displayed during Alarm 3 status.
alm: ALM is alternately displayed when Alarm 1, 2, or 3 is set to ON.
ha: HA is alternately displayed when a heater burnout alarm, HS alarm, or
heater overcurrent alarm is ON.
pvst