Rockwell Automation 900-TC32 Digital Temperature Controllers, Series B - Manual (Page 245)

Publication 900-UM007D-EN-E - January 2011
Parameter Functions & Definitions 5-17
Function: This parameter sets the alarm value for alarm 1. This parameter is
set to one of the input values “X” in the alarm type list. During temperature
input, the decimal point position depends on the currently selected sensor, and
during analog input it depends on the Decimal Point parameter setting.
Related Parameters
• Input Type (Initial Setting function group, page 5-50),
• Scaling upper limit, Scaling lower limit, Decimal point (Initial Setting
function group, page 5-52)
• Standby Sequence Reset (page 5-72), Auxiliary output open in alarm
(page 5-73), Alarm 1 Hysteresis (page 5-61), Alarm 1 Latch (page 5-79)
(Advanced Setting function group).
• Alarm 1 Type (Initial Setting function group, page 5-59)
Alarm Value 2 (900-TC8, 900-TC16)
Conditions of Use: Alarm 2 must be assigned. The alarm 2 type must not be
0, 1, 4, 5, or 12.
Function: This parameter sets the alarm value for alarm 2. This parameter is
set to one of the input values “X” in the alarm type list. During temperature
input, the decimal point position depends on the currently selected sensor, and
during analog input it depends on the Decimal Point parameter setting.
Related Parameters
• Input Type (Initial Setting setting function group, page 5-50)
• Scaling Upper Limit, Scaling Lower Limit, Decimal Point (Initial Setting
function group, page 5-52)
• Standby Sequence Reset (page 5-72), Auxiliary Output open in alarm
(page 5-73), Alarm 2 Hysteresis (page 5-62), Alarm 1 Latch (page 5-79)
(Advanced Setting function group).
• Alarm 2 Type (Initial Setting function group, page 5-59)
Table 5.S
Configurable Range Unit Default
-1999 to 9999 EU 0
Table 5.T
Configurable Range Unit Default
-1999 to 9999 EU 0
al-2