Rockwell Automation 900-TC32 Digital Temperature Controllers, Series B - Manual (Page 4)

4
Attention statements help you to:
• identify a hazard
• avoid a hazard
• recognize the consequences
Trademark List
900Builder and 900BuilderLite are registered trademarks of Rockwell Automation, Inc.
European Communities (EC) Directive Compliance
If this product has the CE mark it is approved for installation within the
European Union and EEA regions. It has been designed and tested to meet
the following directives.
EMC Directive
This product is tested to meet the Council Directive 89/336/EC
Electromagnetic Compatibility (EMC) by applying the following standards,
in whole or in part, documented in a technical construction file:
EN 61326 EMC Requirements — Electrical Equipment for Control,
Measurement and Laboratory Use
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low Voltage,
by applying the safety requirements of EN 61010-1 Safety Requirements
for Electrical Equipment for Control, Measurement and Laboratory Use —
General Requirements. For specific information, see the appropriate
sections in this publication, as well as the Allen-Bradley publication
Industrial Automation Wiring and Grounding Guidelines For Noise
Immunity, Publication 1770-4.1.
This equipment is classified as open equipment and must be mounted in an
enclosure during operation to provide safety protection.
IMPORTANT
Identifies information that is critical for successful
application and understanding of the product.