Agilent Technologies Signal Analyzer N9030a - Manual (Page 1001)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Save
Save
The Save menu lets you choose what you want to save and where you want to save it. Among the
types of files you can save are States, Traces, and Screen Images. In addition, an Export (Data)
option lets you save a number of data types as CSV files for easy import into Excel and other
spreadsheet programs.
Key Path Front-panel key
Mode All
Notes No remote command for this key specifically, but the :MMEM:STORe command is available for
specific file types. An example is :MMEM:STOR:STATe <filename>.
Initial S/W Revision Prior to A.02.00
State
The Save State menu lets you choose a register or file for saving the state.
The content of a state file includes all of the settings and data required to return the analyzer as
closely as possible to the Mode it was in, with the exact settings which were in place, when the
save occurred. The Mode settings in each state file include the settings that are affected by Mode
Preset, as well as the additional settings affected by Restore Mode Defaults; all of the Mode’s
settings. In addition, all of the settings of the Input/Output system are included, even though they
are outside of the Mode’s state, because they are needed to restore the complete setup. Persistent
System
settings (for example, GPIB address) are not affected by either Mode Preset or Restore
Mode Defaults, nor are they included in a saved State file.
After the save completes, the message "File <filename> saved" or "State Register <register number>
saved" is displayed.
For rapid saving, the State menu lists 16 registers to save to. Pressing a Register key initiates the
save. You can also select a file to save to.
The default path for all State Files is:
My Documents\<mode name>\state
where <mode name> is the parameter used to select the mode with the INST:SEL command (for
example, SA for the Spectrum Analyzer).
Key Path Save
Mode All
Remote Command :MMEMory:STORe:STATe <filename>
Remote Language Compatibility Measurement Application Reference 1001