Agilent Technologies Signal Analyzer N9030a - Manual (Page 333)

5 Legacy Command Descriptions
KSh (Display On)
KSh (Display On)
Syntax
Legacy Products
8566A/B, 8568A/B
Description
Turns the instrument’s display On.
Format KSh
Query Data Type N/A
SCPI Equivalent Commands :DISPlay:ENABle ON (see "Display Enable (Remote Command Only)" on page 1464 )
Notes On the early models of spectrum analyzers, CRT beam power was often switched Off to
prevent wear of the CRT. This command was used to turn the CRT beam power on again.
Although this command is supported, displays used on the X-Series instruments have a
much longer life than the CRTs used in the legacy spectrum analyzers.
Remote Language Compatibility Measurement Application Reference 333