Agilent Technologies Signal Analyzer N9030a - Manual (Page 48)

1 About the Analyzer
Window Control Keys
Zoom is a toggle function. Pressing this key once increases the size of the selected window;
pressing the key again returns the window to the original size.
When Zoom is on for a window, that window occupies the entire primary display area. The
zoomed window, since it is the selected window, is outlined in green.
Zoom is local to each Measurement. Each Measurement remembers its Zoom state. The Zoom state
of each Measurement is part of the Mode’s state.
Data acquisition and processing for the other windows continues while a window is zoomed, as does all
SCPI communication with the other windows.
Remote Command :DISPlay:WINDow:FORMat:ZOOM
Remote Command :DISPlay:WINDow:FORMat:TILE
Example :DISP:WIND:FORM:ZOOM sets zoomed
:DISP:WIND:FORM:TILE sets un-zoomed
Preset TILE
Initial S/W Revision Prior to A.02.00
Next Window
The Next Window key can be found on the instrument's front panel, below the display screen.
Pressing the key selects the next window of the current view. When the Next Window key is
pressed, the next window in the order of precedence becomes selected. If the selected window
was zoomed, the next window will also be zoomed.
The window numbers are as shown in the diagrams below. Note that these numbers also
determine the order of precedence (that is, Next Window goes from 1 to 2, then 2 to 3, etc.):
48 Remote Language Compatibility Measurement Application Reference