Agilent Technologies Signal Analyzer N9030a - Manual (Page 1112)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Save
Key Path Save, Data
Mode All
Notes The key location is mode-dependent and will vary.
Brings up the Save As dialog for saving a <mode specific> Save Type. The save is performed
immediately and does not wait until the measurement is complete.
Initial S/W Revision Prior to A.02.00
Save As . . .
When you press “Save As”, the analyzer brings up a Windows dialog and a menu entitled “Save
As.” This menu allows you to navigate to the various fields in the Windows dialog without using
a keyboard or mouse. The Tab and Arrow keys can also be used for dialog navigation.
See "To File . . ." on page 1020 in Save, State for a full description of this dialog and menu.
The default path for saving files is:
For all of the Trace Data Files:
My Documents\<mode name>\data\traces
For all of the Limit Data Files:
My Documents\<mode name>\data\limits
For all of the Measurement Results Data Files:
My Documents\<mode name>\data\<measurement name>\results
For all of the Capture Buffer Data Files:
My Documents\<mode name>\data\captureBuffer
Key Path Save, Data
Mode All
Notes The key location is mode-dependent and will vary.
Brings up the Save As dialog for saving a <mode specific> Save Type. The save is performed
immediately and does not wait until the measurement is complete.
Initial S/W Revision Prior to A.02.00
1112 Remote Language Compatibility Measurement Application Reference