Agilent Technologies Signal Analyzer N9030a - Manual (Page 339)

5 Legacy Command Descriptions
KSl (Transfer Trace B to Trace C)
KSl (Transfer Trace B to Trace C)
Syntax
Legacy Products
8566A/B, 8568A/B
Description
Transfers Trace B data to Trace C
Trace C cannot be an active trace. This means that the data in Trace C cannot be updated as the
instrument sweeps. To ensure that the current settings of the instrument are reflected in the data
transferred from Trace B to Trace C, you must follow the four step process below.
1. Select single sweep mode ( "S2 [two] (Single Sweep)" on page 457 or "SNGLS (Single Sweep)" on
page 463 )
2. Select the desired instrument settings
3. Take one complete sweep using the command "TS (Take Sweep)" on page 497
4. Transfer the data
Format KSl
Query Data Type N/A
SCPI Equivalent Commands None
Notes The functions of KSl are identical to "BTC (Transfer Trace B to Trace C)" on page 250 .
Remote Language Compatibility Measurement Application Reference 339