Agilent Technologies Signal Analyzer N9030a - Manual (Page 681)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Marker
Fixed Marker X Axis Value
Key Path Marker, Fixed
Example :CALC:MARK:MODE FIX sets Marker 1 to Fixed.
Notes See the description under the “ Marker” key, above.
Dependencies
•
You cannot directly set the X or Y value of a Fixed marker which has a marker function turned
on. If an attempt is made to actually adjust it while a Marker Function is on, a warning
message is generated.
•
You cannot directly set the Y value of a Fixed marker while Normalize is turned on. If an
attempt is made to do so while Normalize is on, a warning message is generated.
State Saved The marker control mode (Normal, Delta, Fixed, Off) and X and Y Axis values are saved in
instrument state
Backwards Compatibility
Notes In legacy analyzers, only a Reference marker could be Fixed, and it was always Fixed.
Additionally it could not be noved. In the X-Series, any marker can be set to Fixed and can be
moved to any X or Y value.
Initial S/W Revision Prior to A.02.00
Fixed Marker Y Axis Value
Key Path Marker, Fixed
Example :CALC:MARK:MODE FIX sets Marker 1 to Fixed.
Notes See the description under the Marker key.
Dependencies
You cannot directly set the X or Y value of a Fixed marker which has a marker function turned
on. If an attempt is made to actually adjust it while a Marker Function is on, a warning message
is generated.
State Saved The marker control mode (Normal, Delta, Fixed, Off) and X and Y Axis values are saved in
instrument state
Default Unit depends on the current selected Y axis unit
Initial S/W Revision Prior to A.02.00
Fixed Marker Z Axis Value
The Marker Z position determines which of the 301 traces (0–300) the selected marker is on. It
cannot be set above the maximum trace in the Spectrogram window and, unlike the Marker X
Remote Language Compatibility Measurement Application Reference 681