Agilent Technologies Signal Analyzer N9030a - Manual (Page 799)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Meas Setup
Key Path Meas Setup, Limits, Properties
Notes The selected limit is remembered even when not in the Limit Menu.
Preset Limit 1, not affected by Mode Preset, preset by Restore Mode Defaults.
State Saved Saved in instrument state.
Initial S/W Revision A.02.00
Select Limit
Specifies the selected limit. The term “selected limit” is used throughout this document to specify
which limit will be affected by the functions.
Key Path Meas Setup, Limits, Properties
Notes The selected limit is remembered even when not in the Limit Menu.
Preset Limit 1, not affected by Mode Preset, preset by Restore Mode Defaults.
State Saved Saved in instrument state.
Initial S/W Revision A.02.00
Select Limit
Specifies the selected limit. The term “selected limit” is used throughout this document to specify
which limit will be affected by the functions.
Key Path Meas Setup, Limits, Properties
Notes The selected limit is remembered even when not in the Limit Menu.
Preset Limit 1, not affected by Mode Preset, preset by Restore Mode Defaults.
State Saved Saved in instrument state.
Initial S/W Revision A.02.00
Test Trace
Selects the trace you want the limit to test. A limit is applied to one and only one trace; each trace
can have both an upper and a lower limit. When executing Limit Test, the limit is applied only to
the specified trace.
Remote Language Compatibility Measurement Application Reference 799