Agilent Technologies Signal Analyzer N9030a - Manual (Page 938)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Recall
User specified paths are remembered when you leave and return to a Mode and are reset back to
the default using Restore Mode Defaults.
Sort
Accesses a menu that enables you to sort the files within the File Open dialog. Only one sorting
type can be selected at a time and the sorting happens immediately. The sorting types are By Date,
By Name, By extension,
and By Size.
Files of Type
This field shows the file suffix for the type of file you have selected to recall. For example, if you
navigated here while recalling State, "Mode state (*.state)" is in the field. If you navigated here
while recalling Trace, ""Mode state (*.trace)" is in the field. If you navigated here while importing
a trace data file, "Trace Data (*.csv)" is in the field. For some file types, there is more than one
choice in the dropdown menu, which you can select by using the up and down arrow keys and
Enter.
Up One Level
This key corresponds to the icon of a folder with the up arrow that is in the tool bar of the dialog.
When pressed, it causes the file and folder list to navigate up one level in the directory structure.
The Backspace key does the same thing.
Cancel
This key corresponds to the Cancel selection in the dialog. It causes the current Open request to
be cancelled. The ESC key does the same thing.
Key Path Recall, State
Notes Brings up the Open dialog for recalling a State Save Type
Initial S/W Revision Prior to A.02.00
Register 1 thru Register 16
Selecting any one of these register keys causes the State of the mode from the specified Register to
be recalled. Each of the register keys annotates whether it is empty or at what date and time it
was last modified. In addition, you can use the Edit Register Names key under Save, State to enter
custom names for each register.
Registers are shared by all modes, so recalling from any one of the registers will cause a mode
switch to the mode that was active when the save to the Register occurred.
Although these 16 registers are the only registers available from the front panel, there are 128
state registers available in the instrument. Registers 17–128 are only available from the SCPI
interface, using the *RCL command.
938 Remote Language Compatibility Measurement Application Reference