Agilent Technologies Signal Analyzer N9030a - Manual (Page 1005)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Save
Mode All
Notes Brings up Save As dialog for saving a State Save Type
Initial S/W Revision Prior to A.02.00
To File . . .
When you press “To File”, the analyzer brings up a Windows dialog and a menu entitled “Save
As.” This menu allows you to navigate to the various fields in the Windows dialog without using
a keyboard or mouse. The Tab and Arrow keys can also be used for dialog navigation.
The Listed below
are the functions of the various fields in the dialog, and the corresponding softkeys:
Save
Performs the save to the specified file of the selected type. If the file already exists, a dialog will
appear that allows you to replace the existing file by selecting OK, or you can Cancel the request.
If you select OK, the file will be overwritten. Using the C: drive is strongly discouraged, since it
runs the risk of being overwritten during an instrument software upgrade.
Remote Language Compatibility Measurement Application Reference 1005