Agilent Technologies Signal Analyzer N9030a - Manual (Page 844)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Meas Setup
Autorange (Slower – Follows Signals)
Turns the ADC ranging to automatic which provides the best signal to noise ratio. Autorange is
usually preferred over the manual range choices.
Key Path Meas setup, FFT IF Gain
Example IF:GAIN:FFT AUTOrange
State Saved Saved in instrument state.
Readback Autorange
Initial S/W Revision Prior to A.02.00
Low Gain (Best for Large Signals)
Forces FFT IF Gain to be off.
Key Path Meas Setup, FFT IF Gain
Example IF:GAIN:FFT LOW
State Saved Saved in instrument state.
Readback Low Gain
Initial S/W Revision Prior to A.02.00
High Gain (Best Noise Level)
Forces FFT IF Gain to be on.
Key Path Meas S0etup, FFT IF Gain
Example IF:GAIN:FFT HIGH
Dependencies The High setting for FFT IF Gain is grayed out when Swept IF Gain is manually set to Low (not
when Low is chosen by the auto-rules).
State Saved Saved in instrument state.
Readback High Gain
Initial S/W Revision Prior to A.02.00
844 Remote Language Compatibility Measurement Application Reference