Agilent Technologies Signal Analyzer N9030a - Manual (Page 871)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Mode
Combined Fixed WiMAX
Selects the Combined Fixed WiMAX mode for general purpose measurements of signals following
this standard. There are several measurements available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed
information. If it is not active, exit the Help feature (Esc key), select the mode, and re-access
Help.
Key Path Mode
Example INST:SEL CWIMAXOFDM
INST:NSEL 81
Initial S/W Revision A.02.00
802.16 OFDM (Fixed WiMAX)
Selects the 802.16 OFDM (Fixed WiMAX) mode. This mode allows modulation quality
measurements of signals that comply with IEEE 802.16a–2003 and IEEE 802.16–2004 standards,
with flexibility to measure nonstandard OFDM formats. Along with the typical digital
demodulation measurement results, several additional 802.16 OFDM unique trace data formats
and numeric error data results provide enhanced data analysis.
If you are using the Help feature, this mode must be currently active to access its detailed
information. If it is not active, exit the Help feature (Esc key), select the mode, and re-access
Help.
Key Path Mode
Example INST:SEL WIMAXFIXED
INST:NSEL 104
Initial S/W Revision A.02.00
iDEN/WiDEN/MOTOTalk
Selects the iDEN/WiDEN/MOTOTalk mode for general purpose measurements of iDEN and iDEN-
related signals. There are several measurements available in this mode.
Remote Language Compatibility Measurement Application Reference 871