Agilent Technologies Signal Analyzer N9030a - Manual (Page 771)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Marker Function
Preset EMI Average
State Saved Saved in instrument state
Readback Text Detector name
Backwards
Compatibility SCPI [:SENSe]:EMI:MEASure:DETector:AVERage[:STATe] OFF|ON|0|1|
This command is included for compatibility with the E7400 and PSA option 239 . If sent with On
as a parameter, sets detector 3 to EMI Average. If sent with Off as a parameter, sets detector 3 to
Off
Initial S/W Revision A.02.00
Detector 3
This menu lets you select the detector to be used for Detector 3, or turn Detector 3 off. This is a
1-of-N menu that shows the normal list of detectors, but with the “Auto” key replaced by “Off”.
Key Path Marker Function, Measure at Marker, Detectors
Remote Command See "Detectors" on page 755 .
Example :CALC:MAM:DET3 QPE
Sets the detector for measure at marker detector 1 to Quasi peak
:CALC:MAM:DET3 OFF
Sets the detector for measure at marker detector 1 to Off
Preset EMI Average
State Saved Saved in instrument state
Readback Text Detector name
Backwards
Compatibility SCPI [:SENSe]:EMI:MEASure:DETector:AVERage[:STATe] OFF|ON|0|1|
This command is included for compatibility with the E7400 and PSA option 239 . If sent with On
as a parameter, sets detector 3 to EMI Average. If sent with Off as a parameter, sets detector 3 to
Off
Initial S/W Revision A.02.00
Detector 3
This menu lets you select the detector to be used for Detector 3, or turn Detector 3 off. This is a
1-of-N menu that shows the normal list of detectors, but with the “Auto” key replaced by “Off”.
Key Path Marker Function, Measure at Marker, Detectors
Remote Command See "Detectors" on page 755 .
Remote Language Compatibility Measurement Application Reference 771