Agilent Technologies Signal Analyzer N9030a - Manual (Page 545)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
AMPTD Y Scale
the key is not shown.
If a POW:GAIN:BAND FULL command is sent when a low band preamp is available, the preamp
band parameter is to LOW instead of FULL, and an "Option not installed" message is generated.
Preset LOW
State Saved Saved in instrument state
Initial S/W Revision Prior to A.02.00
Off
Turns the internal preamp off
Key Path AMPTD Y Scale, Internal Preamp
Example :POW:GAIN OFF
Readback Off
Initial S/W Revision Prior to A.02.00
Low Band
Sets the internal preamp to use only the low band.
The frequency range of the installed (optional) low-band preamp is displayed in square brackets
on the Low Band key label.
Key Path AMPTD Y Scale, Internal Preamp
Example :POW:GAIN ON
:POW:GAIN:BAND LOW
Readback Low Band
Initial S/W Revision Prior to A.02.00
Full Range
Sets the internal preamp to use its full range. The low band (0–3.6 GHz or 0–3GHz, depending on
the model) is supplied by the low band preamp and the frequencies above low band are supplied
by the high band preamp.
The frequency range of the installed (optional) preamp is displayed in square brackets on the Full
Range
key label. If the high band option is not installed the Full Range key does not appear.
Remote Language Compatibility Measurement Application Reference 545