Agilent Technologies Signal Analyzer N9030a - Manual (Page 1320)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
System
Time (Remote Command Only)
Sets or queries the time in the instrument.
Mode All
Remote Command :SYSTem:TIME “<hour>,<minute>,<second>”
:SYSTem:TIME?
Example :SYST:TIME “13,05,26”
Notes <hour> is the two digit representation of the hour in 24 hour format
<minute> is the two digit representation of minute
<second> is the two digit representation of second
Unless the current account has Power User or Adminstrator privileges, an error will be generated
by this command and no action will be taken.
Initial S/W Revision Prior to A.02.00
1320 Remote Language Compatibility Measurement Application Reference