Agilent Technologies Signal Analyzer N9030a User Manual
Page 1451
6 RLC Swept SA Measurement Front-Panel & SCPI Reference
View/Display
Annotation Local Settings
This is a Mode Global override of the meas local annotation settings. When it is All Off, it forces
ScreenAnnotation, Meas Bar, Trace, and Active Function Values
settings to be OFF for all measurements in
all modes. This provides the security based "annotation off" function of previous analyzers; hence
it uses the legacy SCPI command.
When it is All Off, the Screen, Meas Bar, Trace, and Active Function Values keys under the Display,
Annotation
menu are grayed out and forced to Off. When Local Settings is selected, you are able to set
the local annotation settings on a measurement by measurement basis.
Key Path
View/Display, Display, System Display Settings
Remote Command
:DISPlay:WINDow[1]:ANNotation[:ALL] OFF|ON|0|1
:DISPlay:WINDow[1]:ANNotation[:ALL]?
Example
:DISP:WIND:ANN OFF
Preset
On (Set by Restore Misc Defaults)
State Saved
Not saved in instrument state.
Backwards Compatibility
Notes
The WINDow parameter and optional subopcode is included for backwards compatibility but
ignored – all windows are equally affected.
Initial S/W Revision
Prior to A.02.00
Annotation Local Settings
This is a Mode Global override of the meas local annotation settings. When it is All Off, it forces
ScreenAnnotation, Meas Bar, Trace, and Active Function Values
settings to be OFF for all measurements in
all modes. This provides the security based "annotation off" function of previous analyzers; hence
it uses the legacy SCPI command.
When it is All Off, the Screen, Meas Bar, Trace, and Active Function Values keys under the Display,
Annotation
menu are grayed out and forced to Off. When Local Settings is selected, you are able to set
the local annotation settings on a measurement by measurement basis.
Key Path
View/Display, Display, System Display Settings
Remote Command
:DISPlay:WINDow[1]:ANNotation[:ALL] OFF|ON|0|1
:DISPlay:WINDow[1]:ANNotation[:ALL]?
Example
:DISP:WIND:ANN OFF
Preset
On (Set by Restore Misc Defaults)
State Saved
Not saved in instrument state.
Backwards Compatibility
Notes
The WINDow parameter and optional subopcode is included for backwards compatibility but
ignored – all windows are equally affected.
Initial S/W Revision
Prior to A.02.00
Remote Language Compatibility Measurement Application Reference
1451