Agilent Technologies Signal Analyzer N9030a - Manual (Page 166)

3 Programming the Analyzer
STATus Subsystem
Preset 0
Status Bits/OPC dependencies Sequential command
Initial S/W Revision Prior to A.02.00
Questionable Integrity Uncalibrated Enable
This command determines which bits in the Questionable Integrity Uncalibrated Condition
Register will set bits in the Questionable Integrity Uncalibrated Event register, which also sets the
Data Uncalibrated Summary bit (bit 3) in the Questionable Integrity Register. The variable
<integer> is the sum of the decimal values of the bits you want to enable.
Mode All
Remote
Command :STATus:QUEStionable:INTegrity:UNCalibrated:ENABle
:STATus:QUEStionable:INTegrity:UNCalibrated:ENABle?
Example STAT:QUES:INT:UNC:ENAB 1
Oversweep (Meas Uncal) will be reported to the Integrity Summary of the Status Questionable register.
Preset 32767
Min 0
Max 32767
Status
Bits/OPC
dependencies Sequential command
Initial S/W
Revision Prior to A.02.00
Questionable Integrity Uncalibrated Event Query
This query returns the decimal value of the sum of the bits in the Questionable Integrity
Uncalibrated Event register.
The register requires that the associated PTR or NTR filters be set before a condition register bit can set a
bit in the event register. The data in this register is latched until it is queried. Once queried, the register is
cleared.
Mode All
Remote Command :STATus:QUEStionable:INTegrity:UNCalibrated[:EVENt]?
Example STAT:QUES:INT:UNC?
166 Remote Language Compatibility Measurement Application Reference