Agilent Technologies Signal Analyzer N9030a - Manual (Page 1307)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
System
Restore Mode Defaults (All Modes)
This selection resets all of the modes in the instrument back to their default state just as a
Restore Mode Defaults does and it switches the instrument to the power-on mode and causes the
default measurement for the power-on mode to be active. This level of Restore System Defaults
does not affect any system settings, but it does affect the state of all modes and does cause a
mode switch unless the instrument was already in the power-on mode.
Confirmation is required to restore the factory default values. The confirmation dialog is:
.
Key Path System, Restore System Defaults
Example :SYST:DEF MOD
Couplings An All Mode will cause the currently running measurement to be aborted, mode switch to the
power-on mode and activate the default measurement for the power-on mode.. It gets the mode
to a consistent state with all of the default couplings set.
Initial S/W Revision Prior to A.02.00
All
This performs a comprehensive reset of ALL analyzer settings to their factory default values. It
resets all of the system setting groups, causes a Restore Mode Defaults for all modes in the
instrument, and switches back to the power-on mode. It does not affect the User Preset file or any
user saved files.
Confirmation is required to restore the factory default values. The confirmation dialog is:
Remote Language Compatibility Measurement Application Reference 1307