Agilent Technologies Signal Analyzer N9030a - Manual (Page 1278)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
System
Key Path Visual annotation in the Show Alignment Statistics screen
Mode All
Remote Command :CALibration:TIME:LPReselector?
Example :CAL:TIME:LPR?
Notes Value is the date and time the last successful Characterize Preselector was executed. The date is
separated from the time by a space character. Returns “” if no Characterize Preselector has ever
been performed on the instrument.
Dependencies In models that do not include preselectors, this command is not enabled and any attempt to set
or query will yield an error.
State Saved No
Initial S/W Revision Prior to A.02.00
Key Path Visual annotation in the Show Alignment Statistics screen
Mode All
Remote Command :CALibration:TEMPerature:LPReselector?
Example :CAL:TEMP:LPR?
Notes Value is in degrees Centigrade at which the last successful Characterize Preselector was
executed.
Dependencies In models that do not include preselectors, this command is not enabled and any attempt to set
or query will yield an error.
State Saved No
Initial S/W Revision Prior to A.02.00
Key Path Visual annotation in the Show Alignment Statistics screen
Mode All
Remote Command :CALibration:AUTO:TIME:OFF?
Example :CAL:AUTO:TIME:OFF?
Notes Value is the elapsed time, in seconds, since Auto Align has been set to Off or Off with Alert. The
value is 0 if Auto Align is ALL or NORF.
State Saved No
Initial S/W Revision Prior to A.02.00
1278 Remote Language Compatibility Measurement Application Reference